|
5399 Aqueous Polyurethane
|
General purpose adhesive, can be used on most surfaces. often used on wood
|
Water
|
Air Dry
|
5 mins
|
Durable
Waterproof
Stain resistant
Solvent free
|
|
5118 EVA
|
Board, wood, carpeting materials, felt, polyester, polystyrene and PVC
|
Water
|
Air Dry
|
5 mins
|
Specifically formulated for screen printing, but can also be applied with roller, brush or spray.
Water-resistant
Heat-resistant
Scrub resistant when dried
|
|
619 Latex
|
Flexible adhesive can be used on latex rubber, foam rubber and substrates requiring flexibility
|
Water
|
Air Dry
|
5 mins
|
Highly flexible
Durable
Water and humidity resistance
|
|
DCA1244 Acrylic
|
Acrylic adhesive with good wetting properties making it suitable for the majority of materials. Frequently used on 3D printed polymers
|
Water
|
Air Dry
|
5 mins
|
Versatile
Durable
Water and humidity resistance
|
|
Dow Corning 734
|
Silicone rubber and other flexible substrates
|
N/A
|
Air Dry
|
7 mins
|
The only adhesive we have found to allow flocking to be applied on other silicone rubber substances
|
|
F57-16 Acrylic
|
General purpose adhesive suitable for most surfaces board, concrete, some metals, some plastics, concrete ceramics, wood, wood composites, carpet, felt and fabrics
|
Water
|
Air Dry
|
5 mins
|
Versatile
Durable
Water and humidity resistance
Non brittle when set
|
|
Epoxy (CPR5/CPH5)
|
All rigid materials, including metal. Frequently used on car interiors including dashboards.
|
Acetone
|
20°C= 12hrs
70°C= 2hrs
Full Cure at 70°C = 3hrs
|
30 mins
|
Waterproof
Working temperatures of up to 120°C
Flame resistant when cured
|
|
Mecoflock D280
|
EPDM and TPU
|
5% Mecodur H5580. The surface should be roughened mechanically or plasma pre-treated and free from any silicone, oil, dust and grease
|
80°C = 20 to 30 mins
|
4 mins
|
Recommend for those with large amounts of experience in flock application
|
|
Mecoflock D387
|
Door mats made of polypropylene, polyamide and coconut fibres
|
Recommend an addition of 4% MECODUR H5580
|
80°C = 40 mins (in a circulating air dryer)
|
5 mins
|
Good wet and dry resistances when cross-linked with the MECODUR H5580
|
|
Mecoflock D404
|
Almost all fabrics, textiles, papers and boards.
Suitable for silk screen printing
|
Thinning not recommended, Clean equipment with water while wet
|
130°C to 140°C = 4 to 6 mins
80°C to 100°C = 30 to 40mins
|
7 hrs
(below 25°C)
|
Durable, Waterproof
Washable up to 90°C
Flexible when cured
2 part heat cured adhesive
|
|
Mecoflock D561
|
A wide range of PVC, soft-PVC and leather type materials
|
Recommend an addition of 5% MECODUR H5580 when curing with heat
|
50°C = 20 to 30 mins
20°C = 24hr
|
4 mins
|
Good resistances to water and UV light when cross-linked with the MECODUR H5580
|
|
PU 34017
|
Suitable for a range of materials, particularly plastic substrates such as ABS and pre-treated PP
|
Recommend an addition of 5% PU34017 hardener.
Clear, Blue or Black
|
18 - 24°C
|
8 mins
|
Durable
High mechanical strength resistance
Very high water resistance
Commonly used as a replacement for solvent based adhesive for automotive interiors and trim
|
