Premium MECOFLOCK D387 Adhesive & MECODUR H5580 Hardener for flocking applications.
MECOFLOCK D387 flocking adhesive is a specially formulated two-component water based adhesive, designed for flocking of door mats made of polypropylene, polyamide and coconut fibres. MECOFLOCK D387 is suitable for manual screen printing as well as on automatic screen printing carousels.
MECOFLOCK D387 when cross-linked with the MECODUR H5580, shows especially good wet and dry resistances. MECOFLOCK D387 should be dried at 80°C for 40 minutes in a circulating air dryer, however 72 hours should be given to allow a full cure. MECOFLOCK D387 may also be dried at up to temperatures of 130°C.
MECOFLOCK D387 Adhesive is most commonly used for flocking on to door mats.
If you are interested in buying in bulk, please contact us for pricing.
Generally applied by manual or automatic screen printing. Requires heat curing.
Adhesive should cover at least 10% of flock fibre length.
The adhesive must be viscose enough to support the flock fibres during the cure.
